Gửi tin nhắn
Dongguan Fulund Intelligent Technology Co., Ltd. 86-0769-21687193 sales@fulund-tech.com
Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo

Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo

  • Tên
    Máy pha chế
  • Lớp tự động
    Hoàn toàn tự động
  • Thành phần cốt lõi
    PLC, Bình áp suất, Khác
  • Kích thước (L * W * H)
    1250 * 1050 * 1560mm
  • Tên sản phẩm
    Máy đúc giọt 24 màu
  • Ứng dụng
    Sản xuất các sản phẩm PVC và silica gel
  • Cuộc sống khuôn
    100k- 500k Shots
  • Vôn
    220V
  • Cân nặng
    420
  • Công suất (kW)
    1,6
  • Xử lý bề mặt
    kết cấu
  • Từ khóa
    Dịch vụ đúc khuôn ép nhựa
  • Từ khoá 1
    máy pha chế tự động logo pvc
  • Từ khóa 2
    máy làm nhãn vali mềm pvc
  • Từ khóa 3
    máy silicone
  • Nguồn gốc
    Trung Quốc
  • Hàng hiệu
    Fulund
  • Chứng nhận
    CE
  • Số mô hình
    FLD-24C
  • Số lượng đặt hàng tối thiểu
    1
  • Giá bán
    USD
  • chi tiết đóng gói
    TRƯỜNG HỢP GỖ
  • Thời gian giao hàng
    7 ngày
  • Điều khoản thanh toán
    T / T, Western Union, MoneyGram
  • Khả năng cung cấp
    100PCS / tháng

Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo

Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo

Cheap Dispenser FAQ
Inconsistent glue size
When the glue is inconsistent, it is mainly caused by the instability of the pressure cylinder or the air pressure that stores the fluid.
The inlet pressure regulator should be set at 10 to 15psi. lower than the lowest pressure in the factory. The pressure used in the pressure cylinder should be above the pressure in the middle of the pressure regulator. Avoid using the low pressure part of the pressure gauge. .
The control pressure of the glue valve should be at least 60psi to ensure stable glue output.
Finally, check the glue time. If it is less than 15/1000 seconds, it will cause the glue to be unstable. The longer the glue time, the more stable the glue.
Flow is too slow
If the flow rate is too slow, change the tubing from 1/4” to 3/8”.
The pipeline should be as short as possible if not needed.
In addition to changing the tube, it is necessary to change the glue port and air pressure, which completely speeds up the flow rate.
air bubbles in fluid
Excessive fluid pressure combined with too short valve opening time may infiltrate air into the liquid. The solution is to reduce the fluid pressure and use a tapered beveled needle.

Application Rang: PVC/Silicon logo, Trademark for garment, footwear outsole/Strap/Vamp, Shoe welting, Cup pad, Silicon keyboard cover, Non-slip mat, Refrigerator Sticker, Disney soft toy, Silicon Key Chain, PVC Zipper puller etc....

 

Technical parameters:

Model No. FLD-24C
Machine Size 1250*1050*1560mm
Weight 420KG
Electric Heating Power 1.6KW
Effective Trip 850*480*80mm
Worktable Size 890*460mm

 

silicone trademark machinesilicone trademark machinesilicone trademark machinesilicone trademark machinesilicone trademark machinesilicone trademark machinesilicone trademark machinesilicone trademark machinesilicone trademark machine